0533 097 47 25info@zoonakustik.com

Zoon Akustik · Elastomeric Rubber · Self-Adhesive Foil-Faced Elastomeric Rubber

Sound Insulation Materials

Self-Adhesive Foil-Faced Elastomeric Rubber

Self-adhesive foil-faced elastomeric rubber is a closed-cell insulation product with a pre-applied adhesive on one side and a protective foil facing on the other. It combines the thermal insulation and condensation-control properties of rubber foam with practical installation and surface protection. The adhesive backing simplifies fitting, while the foil protects the outer surface and provides a neat appearance. Its flexibility allows it to follow different duct and metal-surface shapes.

Technical Specifications

6 mm thickness · 1000 mm width: 30 m²/roll · 1200 mm width: 36 m²/roll

9 mm thickness · 1000 mm width: 20 m²/roll · 1200 mm width: 24 m²/roll

13 mm thickness · 1000 mm width: 14 m²/roll · 1200 mm width: 16.8 m²/roll

19 mm thickness · 1000 mm width: 10 m²/roll · 1200 mm width: 12 m²/roll

25 mm thickness · 1000 mm width: 8 m²/roll · 1200 mm width: 9.6 m²/roll

32 mm thickness · 1000 mm width: 6 m²/roll · 1200 mm width: 7.2 m²/roll

50 mm thickness · 1000 mm width: 4 m²/roll · 1200 mm width: 4.8 m²/roll

Selection and Scope

Selection should consider foam thickness, the substrate receiving the adhesive and the foil facing's operating conditions together. Temperature limits for the foam, adhesive and facing must be checked separately. The surface should be clean and dry; install without overstretching and press firmly into place. Complete joints, corners and transitions with compatible tapes and sealants. Additional protection or fixing for outdoor, overhead and high-temperature applications must follow the technical instructions.

Closed-cell thermal insulation rubber does not serve the same function as open-cell sound-absorbing foam. Acoustic expectations must be verified against product data.

Applications

Suitable for air-conditioning and ventilation ducts, mechanical services surfaces, equipment cabinets, tanks and industrial technical areas. It can be selected for metal panels where easy fitting and a protective outer surface are both required. In vehicle and campervan bodies and appropriate technical compartments of ships and boats, it may provide thermal insulation, condensation control and contact-noise reduction. Each application must follow the selected product's temperature, fire and environmental specifications.

Benefits

The factory-applied adhesive simplifies fitting and can reduce installation time. The foil facing protects the surface and provides a clean finish on exposed services. Closed-cell foam helps limit heat transfer and water vapour movement. With the correct thickness and sealed joints, it supports condensation control. As a resilient layer in suitable systems, it may also help reduce contact vibration and associated noise.

Installation and product selection

Recommending a single product before confirming dimensions, surfaces and installation conditions may not achieve the intended result. Share your application and expectations with Zoon Akustik to explore suitable options.

What can you share for a quotation?

The intended use of the space, approximate dimensions, photographs of the installation surfaces and your colour or texture preferences will help us prepare a quotation.

Technical performance, fire classification and suitability for use are verified against the selected product’s current manufacturer documentation. The product name alone does not constitute a performance guarantee.

Our Services

The right products, balanced acoustics and careful installation.

Room acoustics

We balance reflections within your space with panels and layouts suited to its purpose.

Sound insulation

We plan suitable wall, ceiling and floor systems to reduce sound transmission.

Product selection

We select fabric, felt and wood products to meet the technical and aesthetic needs of your space.

Acoustic consultancy

We assess your needs and help you identify suitable products and installation options for your space.

Design and planning

We bring acoustic performance and architectural design together, developing dimensions and layouts for your project.

Application and installation

We plan the installation of the selected products and systems around site conditions and project requirements.

Get in Touch

How can we help you?

Call us0533 097 47 25Send an emailinfo@zoonakustik.com